Tuesday, Oct 20   


09:00 - 09:30    Opening ceremony    

09:30 - 10:00    Keynote lecture | Etty Feller: Accreditation Facilitating World Acceptance of Data

10:00 - 10:30    coffee break    

10:30 - 11:00    Keynote lecture | Bernd Kroon: The ‘Post-modern’ TIC Laboratory

Session 1

Global market novelties and challenges for metrology and the TIC sector (Testing, Inspection and Certification)
Competence and Quality management in the TIC sector, scientific community, industry, and accreditation

CHAIRPERSON: Prof. Álvaro Silva Ribeiro"   

11:00 - 11:15    Prieto Calviño, J. L.

                         Ambidexterity: Dimensions for a New Scenario
11:15 - 11:30    Andonov, S.; Cundeva-Blajer, M.    

                         Some Considerations about Choosing a Method for TCal
11:30 - 11:45    Brünschwitz, S.; Kleymann-Hilmes, J.    

                         The Quality Management System of the Robert Koch Institute
11:45 - 12:00    Lovrenčić Mikelić, I.    

                         Evolution of Quality Management System at the Ruđer Bošković Institute

12:00 - 13:00    Lunch    

13:00 - 13:30    Keynote lecture | Siniša Prugovečki: From Cloud Networking to Predictive Measuring Equipment Maintenance for Everyone

Session 2

Basic principles and development trends in testing, diagnostics and inspection
Condition monitoring and maintenance of industrial processes, plants and complex systems: measurements and methods
CHAIRPERSON: Dr. Zsolt János Viharos"  

13:30 - 13:45    Bartyś, M.    

                         The Problem of Residual Compensation Effect
13:45 - 14:00    Lapsien, J.    

                         Leak Test of Encapsulated Systems with the Test Medium Compressed Air
14:00 - 14:15    Galvez, A.; Diez-Olivan, A.; Seneviratne, D.; Galar, D.    

                         Synthetic Data Generation in Hybrid Modelling of Railway HVAC System
14:15 - 14:30    Catelani, M.; Ciani, L.; Guidi, G.; Galar, D.   

                         A Practical Solution for HVAC Life Estimation Using Failure Models
14:30 - 14:45    Móricz, L.; Viharos, Zs. J.    

                         Effect of CAM Path Strategies on Tool Life in Ceramics Micro-Cutting
14:45 - 15:00    Burazović, T.    

                         Condition Monitoring and Maintenance of Industrial Processes, Plants and Complex Systems: Measurements and Methods

15:00 - 15:45    coffee break    

Session 3

Condition monitoring and maintenance of industrial processes, plants and complex systems: measurements and methods
CHAIRPERSON: Dr. Zsolt János Viharos 

15:45 - 16:00    Ugwiri, M. A.; Carratu, M.; Paciello, V.; Liguori, C.    

                         Spectral Negentropy and Kurtogram Performance Comparison for Bearing Fault Diagnosis
16:00 - 16:15    Catelani, M.; Ciani, L.; Patrizi, G.; Carratù, M.; Pietrosanto, A., Sommella, P.; Capriglione, D.    

                         Vibration Step Test for Performance Analysis of Inertial Measurement Unit
16:15 - 16:30    Gaspari, A.; D’Emilia, G.    

                          A Maintenance Assessment Measurement-Based Method for SMEs: Case Study of an Italian Mechanical Reality
16:30 - 16:45    Soto, L.; Niño F.; Garzón, D.; Ahumada, D.    

                          Development of Reference Material of Mercury in Fish: A Comparison of Different Alternatives to Homogeneity Assessment
16:45 - 17:00    Morales E, L.; Sinuco L, D.; Ahumada, D.    

                         Stabilization Strategies for Unstable Pesticides in Calibration Reference Materials
17:00 - 17:15    Abella, J.; Mojica, A.; Ahumada, D. A.    

                         Assessment of the Homogeneity of Repackaged Batches of Reference Materials
17:15 - 17:30    España, C.; Escobar, G.; Holguín, K.; Abella, J.; Ahumada, D. A.     

                         Proficiency Testing Schemes for Cadmium in Cocoa Powder Analysis from Colombian Laboratories
17:30 - 17:45    Bohorquez Garzón, A. J.    

                         Long-Term Loading Effect on Stability and Spatial Uniformity of Climatic Chambers
17:45 - 18:00    Paglia, C.; Chollet, A.; Antonietti, S.; Mosca, C.  

                         The Diagnostic and Monitoring of Humidity in Construction Systems: a Tunnel Case

Wednesday, Oct 21
Session 4

Basic principles, market novelties, regulatory framework and solutions in Testing, Diagnostics & Inspection
CHAIRPERSON: Marija Čundeva Blair 

08:00 - 08:15    Azzumar, M., Khairiyati, L.; Yayienda, N.F.    

                         An Early Development of Software for an Automatic Measurement of Multifunction Calibrator
08:15 - 08:30    Nantasitangkool, P.; Kittirakshakula, N.; Watcharayotinkul, W.; Prongmanee, W.; L
amdab, U.; Sukhkhawuttigit, S.; Muenkal, H.; Ratnarathorn, N.; 

                         Samransamruadkit, Z    

                         Interlaboratory Comparison of Gunshot Residue Analysis
08:30 - 08:45    Syahadi, M.; Hayati, A.; Faisal, A.    

                          Implementation of BIPM Calibration Values to Calibration of a Solid State DC Voltage Standard in Laboratory of National Measurement Standard for

                          Electricity and Time – BSN (SNSU – BSN)
08:45 - 09:00    Yan, L.; Wang, H.; Liu, Z.    

                          A B-spline and OS-ELM Fusion Approach for Prognostics with Singularity Problems
09:00 - 09:15    Pathak, G.; Joshi, S.    

                         Testing, Diagnosis and Rectification of High Dissipation Factor in Large Power Transformer
09:15 - 09:30    Hiranaka, Y.; Tsujino, K.    

                         VAE Deviation for Detecting Bearing Anomalies

09:30 - 10:00    coffee break    

10:00 - 10:30    Keynote lecture | Vicki Barwick: Ensuring the Quality of Analytical Measurements – Current Support and Future Challenges

Session 5

Data Analytics, artificial intelligence techniques and machine learning for testing, diagnostics and inspection
CHAIRPERSON: Prof. Lorenzo Ciani  

10:30 - 10:45    Makarewicz, G.; Bilski, P.    

                          Diagnostics of the RIAA Equalizer in a Turntable Using Artificial Neural Network
10:45 - 11:00    Gaspari, A.; Natale, E.; D’Emilia, G.    

                         Effect of Measurement Uncertainty on Artificial Vision Methods, for Quality Control on Composite Components
11:00 - 11:15    Bölkény, I.    

                         AI Based Detection of Gas Hydrate Formation
11:15 - 11:30    Muravyov, S.; Khudonogova, L.; Ho Minh, D.    

                         Precise Measurand Value Estimating by Interval Fusion with Preference Aggregation: Heteroscedasticity Case
11:30 - 11:45    Połok, B.; Bilski, P.    

                         Diagnostics of the Ratchet Mechanism Using the Acoustic Analysis
11:45 - 12:00    Vasilijević, A.; Kapetanović, N; Mišković N.    

                         Inspection of Submerged Structures

12:00 - 13:00    Lunch    

13:00 - 13:30    Keynote lecture | Paolo Moscatti: Scalable Computed Tomography Analysis for Additive Manufacturing

Session 6

Measurements, testing, inspection and diagnostics for industry 4.0
CHAIRPERSON: Prof. Piotr Bilski 

13:30 - 13:45    Viharos, Zs. J.; Jakab, R. B.    

                         Reinforcement Learning for Statistical Process Control of Manufacturing
13:45 - 14:00    Alice, M.; Cristaldi, L.; Ragaini, E.    

                         Prognostic and Health Management using Copula Correlation: a Power System Application
14:00 - 14:15    Frye, M.; Schmitt, R. H.    

                         Structured Data Preparation Pipeline for Machine Learning-Applications in Production
14:15 - 14:30    Erdősy, D.; Bodolai, T.; Váradiné Szarka, A.    

                         Analysing and Simulating Electronic Devices as Antennas
14:30 - 14:45    Uhlmann, E.; Polte, J.; Geisert, C.    

                         Condition Monitoring Concept for Industrial Robots
14:45 - 15:00    Glawar, R.; Ansari, F.; Matyas, K.; Viharos, Zs. J.; Sihn, W.    

                         A Model for Integrating Maintenance Strategies in Autonomous Production Control

15:00 - 15:15    coffee break    

15:15 - 15:45    Keynote lecture | Davor Rubinić: Digitization Trends and Solutions for Oil Terminals

Session 7

Measurements, testing, inspection and diagnostics for industry 4.0
CHAIRPERSON: Giulio d' Emilia    


15:45 - 16:00    Váradiné Szarka, A.; Tollár, S.; Fegyverneki, S.    

                         Development of Lifetime Testing Methods for Increased Requirements of Coolant Pumps in Electrical Vehicles
16:00 - 16:15    Muravyov,  S.; Pogadaeva, E.    

                         Recognition Ability of Interval Fusion with Preference Aggregation in Weld Defects Images Analysis
16:15 - 16:30    Cristaldi, L.; Faifer, M.; Ferrero, A.; Ottoboni, R.    

                         FMEA Analysis and Metrology: a Beneficial Synergy
17:00 - 18:00    TC10 Meeting

                          Conference participants are highly invited for the meeting    

Thursday, Oct 22


08:30 - 09:00    Keynote lecture | Diego Galar: Industrial AI and Cognitive Analytics. The human out of the loop

09:00 - 09:30    Keynote lecture | Jeff Gust: Challenges and Opportunities for Calibration Laboratories 2020 to 2050

09:30 - 10:00    Keynote lecture | Michael H. Ramsey: Measurement Uncertainty from Sampling: Implication for Testing, Diagnostic and Inspection

10:00 - 10:30    coffee break    

Session 8

Measurement uncertainty
CHAIRPERSON: Siniša Prugovečki  


10:30 - 10:45    Ilić, D    

                         The Role of Measurement Uncertainty in the Decision Making for Testing and Inspection
10:45 - 11:00    Ljevaković-Musladin, I.    

                         Measurement Uncertainty according to ISO 19036:2019
11:00 - 11:15    Flego, F.; Pavlović, M.;  Turčinović, M.; Prugovečki, S.    

                         Quantification of Misunderstanding: A Case of Tolerance Limits against Calibration Uncertainty in ISO/IEC 17025 Accredited Laboratories
11:15 - 11:30    Santos, A.; Silva Ribeiro, Á.; Lages Martins, L.    

                         Contribution of the Measurement Uncertainty of the Daylight Factor in Buildings for the Comparison of Experimental Methods
11:30 - 11:45    Benko, P.; Toman, T.    

                         Covariance in 3D Measurement Uncertainty Evaluation
11:45 - 12:00    Škreblin, T.; Košir, G.; Bijelić, F.    

                         Roller Brake Tester Measurement Uncertainty Calculation

12:00 - 13:00    Lunch    

13:00 - 13:30    Keynote lecture | Marko Smolec: Increasing Quality in Cleanroom Walls Production Using Automatized Inspection Process

Session 9

Measurement uncertainty
Verification and validation of methods
Metrological traceability in testing, inspection and diagnostics
CHAIRPERSON: Ivanka Lovrenčić Mikelić

13:30 - 13:45    Maklári, D.; Bodolai, T.; Váradiné Szarka, A.    

                         Effects of Environmental Phenomena on EMC Measurements
13:45 - 14:00    Silva Ribeiro, Á.; Lages Martins, L.; Almeida, M. C.; Alves e Sousa, J.    

                         Optical Metrology Applied to Testing and Inspection in Civil Engineering
14:00 - 14:15    Klier, T.; Míčka, T.; Polák, M.; Hedbávný, M.    

                         Application of the Modified Elastomagnetic Method
14:15 - 14:30    Kinzel, A.; Dittmar, N.    

                         Monitoring of Penetration System Performance according to ISO 3452-1 by Using Test Panels according to ISO 3452-3
14:30 - 14:45    D’Emilia, G.; Gaspari, A.; Natale, E.    

                         Network of MEMS Sensors for Condition Monitoring of Industrial Systems: Accuracy Assessment of Features Used for Diagnosis
14:45 - 15:00    Delaux, D.: Illing, T.; El Hami, A.    

                         Reliability Climatic Test for Composite based on Probabilistic Arrhenius model

15:00 - 15:15    coffee break    

15:15 - 15:45    Keynote lecture | Primož Hafner: Medical Face Mask Testings

Session 10

Measurements, testing, inspection and diagnostics for industry 4.0
Testing, diagnostics and inspection for the improvement of quality of life and environment
Novelties and trends in digital transformation of processes
CHAIRPERSON: Prof. Eduard Egusquiza  

15:45 - 16:00    Drábek, T.; Petrík, V.; Holub, J.    

                         Automatic Control Points Computation for the Acoustic Noise Level Audits
16:00 - 16:15    Kazup, L.; Varadine Szarka, A.    

                         Design, Analysis and Optimization of Magnetic Circuits for Linear Dynamic Actuators
16:15 - 16:30    Najm, S. M.; Paniti, I.; Viharos, Zs. J.    

                         Lubricants and Affecting Parameters on Hardness in SPIF of AA1100 Aluminum
16:30 - 16:45    Viharos, Zs. J.; Bán, B.    

                         Comprehensive Comparison of MTM and BasicMOST, as the Most Widely Applied PMTS Analysis Methods
16:45 - 17:00    Nick, G.; Szaller, Á.;  Viharos, Zs. J.; Várgedő, T.; Bányai, D.; Fries, C.; Fechter, M.    

                         Intelligent Production of The Future – First Results of A Survey
17:00 - 17:15    Lerotić M.; Prugovečki, S.    

                         LorisQ - Global Networking for the Real Predictive Cloud- Based Measuring Equipment Maintenance

17:15 - 17:30    short break    

17:30 - 18:00   
Closing ceremony